Light Sources
- Power Meters
- Power Meter & Light Source Kits
List Price*:
$6510.00
Code:
PK-22S22D24A
Precision Rated Optics has developed optical test kits designed for specific markets within the communications industry.. With new advanced capabilities that make testing simple, PRO Test Kits are the best go-to kits for anyone involved in first-line optical fiber cabling installation and verification. Whether you are a fiber technician or contractor, our expertly configured kits contain all the tools necessary to quickly measure loss, power levels and inspect and clean connector end-faces. Features include SM testing capabilities along with Test Cables, OVA, SC, ST, FC, and universal adapters in a semi-rigid carrying case make PRO the best fiber test kit on the market.
List Price*:
$999.00
Code:
TTK120
Trace and Tone fibers for re-route and cutover at cross-connect panel. TP 220 1310nm Laser, RP 450 Power Meter (+6dBm to -45dBm) & LFI 110 Fiber identifier.
Power Meters ::
NOYES Power Meters ::
Noyes OPM 4 Power Meter
Knowledgebase: The OPM 4-1D optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4-1D also measures insertion loss of multimode or single-mode cables. The OPM 4-1D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or ?W] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4-1D can be powered by optional rechargeable NiMH battery pack. The OPM 4-1D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4-1D is fully N.I.S.T. traceable. Rugged, handheld, lightweight. The OPM 4-1D specifications are:
Noyes Power Meter (660/780/850nm)
List Price*:
$549.00
Code:
OPM-4-1D
Products:
Product Description
Noyes Power Meter (660/780/850nm)
The Noyes OPM 4-1D optical power meter may be used to measure optical power in all plastic fiber optic applications. When used with an LED or laser light source, the OPM 4 can also measure the attenuation (insertion loss) of any multimode optical fiber. Simple to use, the OPM 4 stores reference settings for each calibration wavelength. An easy to read LCD display shows optical power (dBm or uW) or insertion loss (dB) and the calibration wavelength (nm). The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.
- 660, 780, 850 nm
- Short wavelength (SI) photodetector
- Battery powered
- Small size
- Displays power (dBm or uW) or insertion loss (dB)
- N.I.S.T. traceable
Knowledgebase: The OPM 4-1D optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4-1D also measures insertion loss of multimode or single-mode cables. The OPM 4-1D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or ?W] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4-1D can be powered by optional rechargeable NiMH battery pack. The OPM 4-1D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4-1D is fully N.I.S.T. traceable. Rugged, handheld, lightweight. The OPM 4-1D specifications are:
| Optical | OPM 4-1D |
| Optical Calibrated Wavelengths (nm) | 660, 780, 850 |
| Detector Type | Silicon (Si) |
| Measurement Range (dBm) | + 6 to - 70 |
| Tone detect Range (dBm) | +6 to -45 |
| Wavelength ID range (dBm) | |
| Accuracy (dB)* *Accuracy measured at 25 C and -10 dBm p per N.I.S.T. standards | +/- 0.25 |
| Resolution (dB) | 0.01 |
| Measurement units | dB, dBm, ?W |
| General | |
| Power | 2 x AA batteries, optional NiMH |
| Battery life (2 x AA) | 300 hours |
| Operating temperature | -10 to 50 C, 90% RH (non-condensing) |
| Storage temperature | -30 to 60 C, 90% RH (non-condensing) |
| Size (H x W x D) | 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm) |
| Weight | 0.58 lb (0.26 kg) |
| All specifi cations at 25 C |
Related Products
List Price*:
$549.00
Code:
OPM-4-1D
Products:
List Price*:
$449.00
Code:
OPM4-2D
Products:
List Price*:
$549.00
Code:
OPM4-3D
Products:
List Price*:
$599.00
Code:
OPM4-4D
Products:
Featured Products
List Price*:
$2800.00
Code:
FIT-S105-C
Kit Handheld Display with integrated Power Meter & 400X Patch Cord Module. Includes 200/400X FBP Probe Microscope, FBPT Tips (SC, LC), FMAE Adapters, (U25M, U12M), Bulkhead/Patchcord Cleaning Tools (2.5mm & 1.25mm), Case & power supply - US
List Price*:
$2945.00
Code:
FBK-503
Contractor Kit, SM & MM, w/ Data Storage
List Price*:
$3153.44
Code:
PK-12D13D24AL
PRO Kit "Lite": Testing Gear Only (no cleaning or inspection gear).
List Price*:
$2750.00
Code:
2126/07
All JDSU OMK optical test kits include one power meter and one light source as standard. Each kit is packaged in its own field carrying case complete with all the necessary adapters, cables and accessories. Each OMK-55 kit includes an OLP-55 Power Meter, OLS-55 Laser Source, and also may include OLA-55 Level Attenuator.
List Price*:
$675.00
Code:
FPM-302X-XX
FPM-302X = High-power Ge detector. The FLS-300 or FOT-300 units can transmit with a wavelength-identification digital encrypted
protocol, enabling the FPM-300 Power Meter to automatically use the proper calibration
parameters. This feature reduces the need for communication between the two technicians and
decreases the potential for error.